Design by OMC²
Show Categories
Recreate Image Tsofar Recliner #477 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=477&type=Recliner [View]
Product Family: Tsofa
Tsofar Recliner
The Recliner: Tsofar is a recliner, actually as in most recliners is the set of armchair and ottoman, I was inspired by the 1960s futuristic furniture fashion..

How to Produce: Legs and body in wood, coated by polyurethane and then coated by textiles. Seating is polyurethane coated by leather..

Possible Materials: The designer noted the following materials could be used in production: Wood, Metal, Leather.

Dimensions and Packaging: The enclosing box for a single Tsofar Recliner is 1015 mm x 650 mm x 1248 mm, each box contains a single Tsofar Recliner and the bounding box dimensions for the package is 1065 mm x 700 mm x 1298 mm, roughly 36 pieces fit into 20' standard container and 68 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2009-04-05 19:14:15.


Get a price quote for Tsofar Recliner or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Tsofa Aile Guest Set #476 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=476&type=Guest+Set [View]
Product Family: Tsofa
Tsofa Aile Guest Set
The Guest Set: This is an example setting of the tsofa furniture family, in this picture we have four seater, two seater, the armchair tsofa bir and the tsofax the coffee table..

How to Produce: You may refer to individual pieces but in general the production is done by coating polyurethane to wooden legs which are solid cut and then covering it with textiles, also sometimes metal supports can be used, all the seats are polyurethane inside, leather outside..

Possible Materials: The designer noted the following materials could be used in production: Wood, Metal, Leather.

Dimensions and Packaging: The enclosing box for a single Tsofa Aile Guest Set is 3958 mm x 650 mm x 2606 mm, each box contains a single Tsofa Aile Guest Set and the bounding box dimensions for the package is 4008 mm x 700 mm x 2656 mm, roughly 8 pieces fit into 20' standard container and 17 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2009-04-05 19:07:42.


Get a price quote for Tsofa Aile Guest Set or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Tsofax Coffee Table #475 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=475&type=Coffee+Table [View]
Product Family: Tsofa
Tsofax Coffee Table
The Coffee Table: This is an unorthodox coffee table, it could also be used as a seating solution. I wanted to do something that fits well to the futuristic feelings of the furniture of 1960s..

How to Produce: Production in wood for legs, metal for connecting the legs, the metal is bend tubes that are welded in the middle. Coated by polyurethane foam and textiles. you can imagine how they produce the seating for cars, its pretty similar..

Possible Materials: The designer noted the following materials could be used in production: Wood, Metal, Leather.

Dimensions and Packaging: The enclosing box for a single Tsofax Coffee Table is 1819 mm x 431 mm x 1434 mm, each box contains a single Tsofax Coffee Table and the bounding box dimensions for the package is 1869 mm x 481 mm x 1484 mm, roughly 30 pieces fit into 20' standard container and 60 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2009-04-05 19:04:10.


Get a price quote for Tsofax Coffee Table or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Tsofaaa Bench #474 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=474&type=Bench [View]
Product Family: Tsofa
Tsofaaa Bench
The Bench: Tsofaaa is a bench that was designed to complement the Tsofa family of designs. .

How to Produce: Wooden legs are connected by a metal piece inside the top seating part, wooden legs coated by polyureathane foam and textiles, seating coated by leather..

Possible Materials: The designer noted the following materials could be used in production: Wood, Metal, Leather.

Dimensions and Packaging: The enclosing box for a single Tsofaaa Bench is 1615 mm x 431 mm x 500 mm, each box contains a single Tsofaaa Bench and the bounding box dimensions for the package is 1665 mm x 481 mm x 550 mm, roughly 80 pieces fit into 20' standard container and 140 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2009-04-05 19:01:13.


Get a price quote for Tsofaaa Bench or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Tsofa Rsogood Ottoman #473 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=473&type=Ottoman [View]
Product Family: Tsofa
Tsofa Rsogood Ottoman
The Ottoman: Inspired by 1960s futuristic furniture and beans, this is an ottoman to complement the Tsofa family. Of course could also be used as a stool, but I initially designed it to be an ottoman..

How to Produce: Wooden legs coated by sponge and textiles, leather top part..

Possible Materials: The designer noted the following materials could be used in production: Wood, Polyurethane Foam, Leather.

Dimensions and Packaging: The enclosing box for a single Tsofa Rsogood Ottoman is 655 mm x 431 mm x 500 mm, each box contains a single Tsofa Rsogood Ottoman and the bounding box dimensions for the package is 705 mm x 481 mm x 550 mm, roughly 165 pieces fit into 20' standard container and 340 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2009-04-05 18:57:33.


Get a price quote for Tsofa Rsogood Ottoman or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Tsofa Bir Arm Chair #472 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=472&type=Arm+Chair [View]
Product Family: Tsofa
Tsofa Bir Arm Chair
The Arm Chair: The armchair was designed to be family of Tsofa, a series of designs inspired by 1960s sci-fi furniture fashion..

How to Produce: Wooden structure coated by foam and skinned by textiles. Leather seating inside is polyurethane foam..

Possible Materials: The designer noted the following materials could be used in production: Wood, Polyurethane Foam, Leather.

Dimensions and Packaging: The enclosing box for a single Tsofa Bir Arm Chair is 1015 mm x 650 mm x 738 mm, each box contains a single Tsofa Bir Arm Chair and the bounding box dimensions for the package is 1065 mm x 700 mm x 788 mm, roughly 54 pieces fit into 20' standard container and 102 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2009-04-05 18:54:30.


Get a price quote for Tsofa Bir Arm Chair or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Tsofa Iki Couch #471 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=471&type=Couch [View]
Product Family: Tsofa
Tsofa Iki Couch
The Couch: Tsofa Iki is a two seater sofa, inspired by 1960s furniture fashion, and a bit of sci-fi..

How to Produce: Wooden structure is solid cut and connected, foam is cut according to the shape and it is fit inside a skin of textiles, the seating is polyurethane foam again fitted inside a cow hide..

Possible Materials: The designer noted the following materials could be used in production: Wood, Polyurethane Foam, Leather.

Dimensions and Packaging: The enclosing box for a single Tsofa Iki Couch is 1515 mm x 650 mm x 738 mm, each box contains a single Tsofa Iki Couch and the bounding box dimensions for the package is 1565 mm x 700 mm x 788 mm, roughly 48 pieces fit into 20' standard container and 102 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2009-04-05 18:44:26.


Get a price quote for Tsofa Iki Couch or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Tsofa Uc Couch #470 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=470&type=Couch [View]
Product Family: Tsofa
Tsofa Uc Couch
The Couch: Tsofa Uc is a three seater sofa, again it is inspired by 1960s fashion..

How to Produce: Wood structure covered by foam and textiles, leather seating..

Possible Materials: The designer noted the following materials could be used in production: Wood, Polyurethane Foam, Leather.

Dimensions and Packaging: The enclosing box for a single Tsofa Uc Couch is 1975 mm x 650 mm x 738 mm, each box contains a single Tsofa Uc Couch and the bounding box dimensions for the package is 2025 mm x 700 mm x 788 mm, roughly 27 pieces fit into 20' standard container and 54 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2009-04-05 18:41:46.


Get a price quote for Tsofa Uc Couch or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Tsofa Dort Couch #469 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=469&type=Couch [View]
Product Family: Tsofa
Tsofa Dort Couch
The Couch: Tsofa Dort is a four seater sofa, the design was inspired by 1960s sci-fi furniture that has long been forgetten, I want to bring that era..

How to Produce: Wood or metal structure covered with polyurethane foam or sponge, and then by textiles, seating in cow hide leather..

Possible Materials: The designer noted the following materials could be used in production: Wood, Polyurethane Foam, Leather.

Dimensions and Packaging: The enclosing box for a single Tsofa Dort Couch is 2275 mm x 650 mm x 738 mm, each box contains a single Tsofa Dort Couch and the bounding box dimensions for the package is 2325 mm x 700 mm x 788 mm, roughly 27 pieces fit into 20' standard container and 51 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2009-04-05 18:39:27.


Get a price quote for Tsofa Dort Couch or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Mesh Grand Chair #466 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=466&type=Grand+Chair [View]
Mesh Grand Chair
The Grand Chair: Mesh is an organic chair inspired by bugs and worms, the chair is designed for both outdoors and indoors and will protect you from sunshine and also with some pillows provides superb comfort..

How to Produce: Metal Skelton is constructed by tubes which are bended and welded, an elastic mash covered with textiles and or leather..

Possible Materials: The designer noted the following materials could be used in production: Metal, Leather, Textiles.

Dimensions and Packaging: The enclosing box for a single Mesh Grand Chair is 720 mm x 1713 mm x 1039 mm, each box contains a single Mesh Grand Chair and the bounding box dimensions for the package is 770 mm x 1763 mm x 1089 mm, roughly 18 pieces fit into 20' standard container and 42 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2009-04-05 18:26:18.


Get a price quote for Mesh Grand Chair or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Spi Chair #465 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=465&type=Chair [View]
Spi Chair
The Chair: Inspired by spiders, the Spider's Spi chair makes you ask how come this thing is stable. Well because the body is also made of steel it is not elastic as you imagine it to be, it is illusion. However it is coated with leather so that you will feel comfortable no matter what..

How to Produce: Legs are bended tubes of metal, metal planes are bended and press cut for the body, welded to legs and then coated by leather. Alternatively, if you would prefer to make it elastic, you can connect the legs in this case you do not need to make seating in metal..

Possible Materials: The designer noted the following materials could be used in production: Metal, Leather.

Dimensions and Packaging: The enclosing box for a single Spi Chair is 560 mm x 995 mm x 831 mm, each box contains a single Spi Chair and the bounding box dimensions for the package is 610 mm x 1045 mm x 881 mm, roughly 72 pieces fit into 20' standard container and 144 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2009-04-04 20:44:57.


Get a price quote for Spi Chair or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Eagle Indoor Seating System #464 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=464&type=Indoor+Seating+System [View]
Eagle Indoor Seating System
The Indoor Seating System: Inspired by the American Eagle, this seating system is huge, it is both sofa, bench, chaise lounge, waiting system and everything. I think I would definitely have it for my office if only space was not a problem, but this could be placed in interiors as sculptural space filling element, for example in a museum enterence etc..

How to Produce: Initially designed in leather, but of course other materials could be used as well. A skeleton of metal is build, this skeleton is covered by polyurethane foam, and afterwards they are zipped individually into the curved planes. Legs can be cast or pressure formed, the legs have a wide U ( shaped curve at the bottom, the curved planes are mounted to that..

Possible Materials: The designer noted the following materials could be used in production: Metal, Polyurethane Foam, Leather.

Dimensions and Packaging: The enclosing box for a single Eagle Indoor Seating System is 3391 mm x 867 mm x 684 mm, each box contains a single Eagle Indoor Seating System and the bounding box dimensions for the package is 3441 mm x 917 mm x 734 mm, roughly 24 pieces fit into 20' standard container and 48 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2009-04-03 08:22:55.


Get a price quote for Eagle Indoor Seating System or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Kar Aile Guest Set #463 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=463&type=Guest+Set [View]
Product Family: Kar
Kar Aile Guest Set
The Guest Set: This is the Kar family, In this picture there is Kar Dort, Karuc, Karbir, Kar Kocaman, Kar Kucuk. This is a huge set that occupies extraordinary large spaces, perfect to be used as a space fill, as it has unique characteristics..

How to Produce: Production in Metal plate press and bending, very little welding necessary for the seatings. From the cut plane of metal, all pieces can be produced. First Polyurethane is coated on metal and then it is covered by leather or other textiles. Stripes can be painted easily by bands which can be prepared in advance as a template..

Possible Materials: The designer noted the following materials could be used in production: Metal, Leather, Polyurethane Foam.

Dimensions and Packaging: The enclosing box for a single Kar Aile Guest Set is 3616 mm x 850 mm x 2958 mm, each box contains a single Kar Aile Guest Set and the bounding box dimensions for the package is 3666 mm x 900 mm x 3008 mm, roughly 7 pieces fit into 20' standard container and 13 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2009-04-03 08:10:09.


Get a price quote for Kar Aile Guest Set or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Kardort Couch #460 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=460&type=Couch [View]
Product Family: Kar
Kardort Couch
The Couch: This is finally a four seater of Kar series, actually even 5-6 people can fit easily, but the fact is that people are not sardines and they should not be stacked, This great sofa provides very high comfort and enough space to relax totally..

How to Produce: Press cut and bended because of the huge size, this particular one might be realized from two separate planes of metal and welded..

Possible Materials: The designer noted the following materials could be used in production: Metal, Polyurethane Foam, Leather.

Dimensions and Packaging: The enclosing box for a single Kardort Couch is 2734 mm x 850 mm x 758 mm, each box contains a single Kardort Couch and the bounding box dimensions for the package is 2784 mm x 900 mm x 808 mm, roughly 21 pieces fit into 20' standard container and 45 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2009-04-03 07:53:40.


Get a price quote for Kardort Couch or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Karuc Couch #459 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=459&type=Couch [View]
Product Family: Kar
Karuc Couch
The Couch: This is a three seater, not four. I especially make this line of furniture huge, to be a decorative fill for wast spaces. Kar series are fun!.

How to Produce: Production is by plate press cutting and then bending, Seating could also be produced the same way, leather can be applied afterwards..

Possible Materials: The designer noted the following materials could be used in production: Metal, Polyurethane Foam, Leather.

Dimensions and Packaging: The enclosing box for a single Karuc Couch is 2354 mm x 850 mm x 758 mm, each box contains a single Karuc Couch and the bounding box dimensions for the package is 2404 mm x 900 mm x 808 mm, roughly 21 pieces fit into 20' standard container and 45 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2009-04-03 07:49:41.


Get a price quote for Karuc Couch or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Kariki Couch #458 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=458&type=Couch [View]
Product Family: Kar
Kariki Couch
The Couch: This is a double seater, double the comfort of the Karbir. I especially made it slightly bigger than the normal two seaters, these are not designed for little houses, these are to fill huge spaces..

How to Produce: Production is simple plate pressing and forming. .

Possible Materials: The designer noted the following materials could be used in production: Metal, Leather, Polyurethane Foam.

Dimensions and Packaging: The enclosing box for a single Kariki Couch is 1674 mm x 850 mm x 758 mm, each box contains a single Kariki Couch and the bounding box dimensions for the package is 1724 mm x 900 mm x 808 mm, roughly 27 pieces fit into 20' standard container and 63 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2009-04-03 07:46:07.


Get a price quote for Kariki Couch or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Karbir Arm Chair #457 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=457&type=Arm+Chair [View]
Product Family: Kar
Karbir Arm Chair
The Arm Chair: The project Kar is about creating a product family of furniture that is industrially feasible and easy to produce but yet it does not look as if it is coming from a factory, rather it feels its coming from an atelier..

How to Produce: Metal plane is press-cut and folded, thats it. Afterwards automatic painting process, leather coating for the seat..

Possible Materials: The designer noted the following materials could be used in production: Metal, Leather, Polyurethane Foam.

Dimensions and Packaging: The enclosing box for a single Karbir Arm Chair is 994 mm x 850 mm x 758 mm, each box contains a single Karbir Arm Chair and the bounding box dimensions for the package is 1044 mm x 900 mm x 808 mm, roughly 54 pieces fit into 20' standard container and 108 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2009-04-02 16:56:36.


Get a price quote for Karbir Arm Chair or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Copyrights: If you like to print the designs on a design magazine or publication, unmasked and higher resolutions and 3D versions will be available on demand, please write us your requests and details to omcdesign@gmail.com. If you like to produce the designs or use in your projects please contact us. ! Everything on this site is copyright © OMC² Design Studios; all rights reserved. Please do not use anything without permission. To get permission, write to Onur Müstak Çobanli, and explain what you intend to use it for. If you have a blog and would like to write about us, feel free to do so without asking permission, you can use the images here, please include a link to our webpage and if possible keep the watermark.
OR
Design #ID:
Share This  
Facebook Icon
Join our Facebook group!
Twitter Icon
Folow us at Twitter
Feed Icon
Subscribe to RSS Feed
Memori.ru
Hatena
Del.icio.us
Yigg.de
Blinklist
Oyyla
StumbleUpon



Pages: 1 2 3 4 5 6 7 8 <Back