Design by OMC²
Show Categories
Recreate Image Ma Sa Table #203 designed in 2008
Permanent Link : http://www.omcdesign.com/?design=203&type=Table [View]
Ma Sa Table
The Table: An organic shaped table, that blends very well to the environment. A little bit of retroness to your room, you have bought all these round chairs and notice your totally square table does not fit! Here is what you can actually use if you want a square table that blends in. This table also grows! just pull the plane..

How to Produce: Legs are big metal tubes, top part of the legs are metal casted. The production for the planes are left to the imaginative producer! (Hint; how about press cutting?) Can also be realised in wood which would totally have a different feeling..

Possible Materials: The designer noted the following materials could be used in production: Metal, Plastic, Plastic.

Dimensions and Packaging: The enclosing box for a single Ma Sa Table is 1200 mm x 754 mm x 1000 mm, each box contains a single Ma Sa Table and the bounding box dimensions for the package is 1250 mm x 804 mm x 1050 mm, roughly 36 pieces fit into 20' standard container and 66 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2008-12-07 07:16:12.


Get a price quote for Ma Sa Table or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Ki Taplik Bookshelf #202 designed in 2008
Permanent Link : http://www.omcdesign.com/?design=202&type=Bookshelf [View]
Ki Taplik Bookshelf
The Bookshelf: A modular library that needs to be connected to the wall meanwhile takes less space and lets more sunshine goodness for your books and environment..

How to Produce: Injection molding of plastics could be a good solution to decrease weight and make it more mass produceable, however, you can also metal cast it in this case I would leave some space inside to reduce weight, can be realised in wood as well..

Possible Materials: The designer noted the following materials could be used in production: Plastic, Plastic, Wood.

Dimensions and Packaging: The enclosing box for a single Ki Taplik Bookshelf is 540 mm x 2146 mm x 296 mm, each box contains a single Ki Taplik Bookshelf and the bounding box dimensions for the package is 590 mm x 2196 mm x 346 mm, roughly 84 pieces fit into 20' standard container and 140 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2008-12-07 06:35:10.


Get a price quote for Ki Taplik Bookshelf or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Kitap Lik Bookshelf #201 designed in 2008
Permanent Link : http://www.omcdesign.com/?design=201&type=Bookshelf [View]
Kitap Lik Bookshelf
The Bookshelf: Behold! A strong library is here, made from purest of metals that itself is fireproof, it will stay there even if the knowledge need to craft is long gone. Actually I would really like to do a real fireproof library that protects the books somehow. The sides of this library could also be used for storing books as you see..

How to Produce: Totally metal planes (or wood if you prefer) are used. Sides have joint parts and it is produced by presscutting the shapes, and perhaps 1-2 welding on some spots, but I am confident that we can find also "a cut-connect" solution for the all item..

Possible Materials: The designer noted the following materials could be used in production: Metal.

Dimensions and Packaging: The enclosing box for a single Kitap Lik Bookshelf is 1488 mm x 2139 mm x 655 mm, each box contains a single Kitap Lik Bookshelf and the bounding box dimensions for the package is 1538 mm x 2189 mm x 705 mm, roughly 18 pieces fit into 20' standard container and 34 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2008-12-07 06:28:11.


Get a price quote for Kitap Lik Bookshelf or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Kit Aplik Bookshelf #200 designed in 2008
Permanent Link : http://www.omcdesign.com/?design=200&type=Bookshelf [View]
Kit Aplik Bookshelf
The Bookshelf: This is a simpler and perhaps a more *anticipated* version of Kita Plik #199. With a different planar support for books..

How to Produce: Same with #199, shortly; metal tubes for support, welded-connected and press cut and formed metal for the red parts..

Possible Materials: The designer noted the following materials could be used in production: Metal, Plastic, Plastic.

Dimensions and Packaging: The enclosing box for a single Kit Aplik Bookshelf is 838 mm x 2149 mm x 655 mm, each box contains a single Kit Aplik Bookshelf and the bounding box dimensions for the package is 888 mm x 2199 mm x 705 mm, roughly 27 pieces fit into 20' standard container and 51 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2008-12-07 06:10:16.


Get a price quote for Kit Aplik Bookshelf or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Kita Plik Bookshelf #199 designed in 2008
Permanent Link : http://www.omcdesign.com/?design=199&type=Bookshelf [View]
Kita Plik Bookshelf
The Bookshelf: A library that is slightly different from what you will see on your local furniture dealer, the books are put with some rotation, and there is also a plane that can hold your pens and stuff or even showcase a book..

How to Produce: Totally metal or partly metal. Legs / Support coloumns are for sure metal tubes or sticks welded, connected. But you might realise that it repeats for almost every level so this library can change in height if you wish to make it modular. The black part that holds the books are press cut metal plane that is bended automatically by pressing machine, but they could even be realised in plastics by injection molding! or they could be some high quality wood..

Possible Materials: The designer noted the following materials could be used in production: Plastic, Plastic, Metal.

Dimensions and Packaging: The enclosing box for a single Kita Plik Bookshelf is 838 mm x 2150 mm x 829 mm, each box contains a single Kita Plik Bookshelf and the bounding box dimensions for the package is 888 mm x 2200 mm x 879 mm, roughly 27 pieces fit into 20' standard container and 45 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2008-12-07 06:05:24.


Get a price quote for Kita Plik Bookshelf or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Deniz Yildizi Outdoor Seating System #198 designed in 2008
Permanent Link : http://www.omcdesign.com/?design=198&type=Outdoor+Seating+System [View]
Deniz Yildizi Outdoor Seating System
The Outdoor Seating System: Well, this is quite bit of huge furniture for outdoor spaces, the shape comes from the sea stars and I used the color blue for this as is similar to water-sea feeling of color, however you can have it any color. The center is left empty so that a huge sunbrella can fit in! lets 5 people to sit as if on a ride, designed for public spaces..

How to Produce: The individual *legs* of the sea-star is the same shape. From Plastics: we create one *leg* in two parts totaly in 10 parts by injection molding. Fiberglass in another alternative for sure..

Possible Materials: The designer noted the following materials could be used in production: Plastic, Plastic.

Dimensions and Packaging: The enclosing box for a single Deniz Yildizi Outdoor Seating System is 1354 mm x 681 mm x 1354 mm, each box contains a single Deniz Yildizi Outdoor Seating System and the bounding box dimensions for the package is 1404 mm x 731 mm x 1404 mm, roughly 32 pieces fit into 20' standard container and 64 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2008-12-07 07:17:20.


Get a price quote for Deniz Yildizi Outdoor Seating System or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Celtic Ube Stool #197 designed in 2008
Permanent Link : http://www.omcdesign.com/?design=197&type=Stool [View]
Celtic Ube Stool
The Stool: Inspired by the heraldic cube in Diablo(tm) and celtic designs, you can use it as an ubrella holder or even as stairs. PS: This is not actually a cube! It is a rectangualar prism..

How to Produce: Depending on material, from metal we can have fireproof furniture; press cut the plates (not so thin), cast the patterned sides and weld, this is of course one of many options! From plastics, we can have injection mold of a frame (the cube with 4 sides) and then we can insert the again injected molded sides that have the pattern shape. From ceramics, it could be same as plastics and I would like to see that! From glass.. the same as plastics. Wood might require some craftsmanship..

Possible Materials: The designer noted the following materials could be used in production: Metal, Plastic, Plastic.

Dimensions and Packaging: The enclosing box for a single Celtic Ube Stool is 410 mm x 375 mm x 375 mm, each box contains a single Celtic Ube Stool and the bounding box dimensions for the package is 460 mm x 425 mm x 425 mm, roughly 468 pieces fit into 20' standard container and 936 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2008-12-07 07:16:24.


Get a price quote for Celtic Ube Stool or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Rexbone Bookshelf #196 designed in 2008
Permanent Link : http://www.omcdesign.com/?design=196&type=Bookshelf [View]
Rexbone Bookshelf
The Bookshelf: Stacked up happy dinasourus rex bones, in a harmony of balance and tranquil feelings carrying knowledge? Well, this is just a library that has a strange shape, a shape that I like..

How to Produce: The library can grow to any hight as it is modular in structure, and it can be composed into 2 parts; planes, simple to realise from any material, and the bones - the supports required to be metal casting. You can stick, insert or join the parts depending on material of choice. This could for sure also be realised by wood, what a craftmanship!.

Possible Materials: The designer noted the following materials could be used in production: Plastic, Plastic, Metal.

Dimensions and Packaging: The enclosing box for a single Rexbone Bookshelf is 640 mm x 2113 mm x 377 mm, each box contains a single Rexbone Bookshelf and the bounding box dimensions for the package is 690 mm x 2163 mm x 427 mm, roughly 54 pieces fit into 20' standard container and 108 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2010-05-15 08:05:12.


Get a price quote for Rexbone Bookshelf or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Bitkim Stool #195 designed in 2008
Permanent Link : http://www.omcdesign.com/?design=195&type=Stool [View]
Bitkim Stool
The Stool: Perhaps you should see the bottom part which is identical to the top part, its like an ivy-grown stool..

How to Produce: Legs are bend metal, top could also be metal but I believe injection mold plastic would make it both lighter and more suitable for mass production..

Possible Materials: The designer noted the following materials could be used in production: Metal, Plastic.

Dimensions and Packaging: The enclosing box for a single Bitkim Stool is 604 mm x 420 mm x 354 mm, each box contains a single Bitkim Stool and the bounding box dimensions for the package is 654 mm x 470 mm x 404 mm, roughly 312 pieces fit into 20' standard container and 624 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2008-12-07 05:33:14.


Get a price quote for Bitkim Stool or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Bigboy Table #194 designed in 2008
Permanent Link : http://www.omcdesign.com/?design=194&type=Table [View]
Bigboy Table
The Table: A heavy table that somewhat has a soviet feeling of metal and durability, meanwhile curved and transparent..

How to Produce: Top part is glass, cutted and edges softened, Bottom part metal legs are identical and they are press cut and weld..

Possible Materials: The designer noted the following materials could be used in production: Metal, Plastic.

Dimensions and Packaging: The enclosing box for a single Bigboy Table is 1580 mm x 753 mm x 830 mm, each box contains a single Bigboy Table and the bounding box dimensions for the package is 1630 mm x 803 mm x 880 mm, roughly 36 pieces fit into 20' standard container and 63 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2008-12-07 05:30:55.


Get a price quote for Bigboy Table or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Bizon Triple Stool #193 designed in 2008
Permanent Link : http://www.omcdesign.com/?design=193&type=Triple+Stool [View]
Bizon Triple Stool
The Triple Stool: Designed for outdoors as public seating, this triple stool is one of its kind! The first triple stool I have designed..

How to Produce: Legs are metal tubes bended, top part is; either metal cast, or injection molded plastics attached. .

Possible Materials: The designer noted the following materials could be used in production: Metal.

Dimensions and Packaging: The enclosing box for a single Bizon Triple Stool is 950 mm x 435 mm x 950 mm, each box contains a single Bizon Triple Stool and the bounding box dimensions for the package is 1000 mm x 485 mm x 1000 mm, roughly 60 pieces fit into 20' standard container and 120 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2008-12-01 21:33:43.


Get a price quote for Bizon Triple Stool or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Terslale Coffee Table #192 designed in 2008
Permanent Link : http://www.omcdesign.com/?design=192&type=Coffee+Table [View]
Terslale Coffee Table
The Coffee Table: Taking its roots from the Ottoman geometric shapes for legs, top part in elegant glass having a red coloring and stripes. Fireproof and it is a best fit for your small spaces as well!..

How to Produce: Legs bended metal tubes, top part round cutted glass..

Possible Materials: The designer noted the following materials could be used in production: Glass, Plastic.

Dimensions and Packaging: The enclosing box for a single Terslale Coffee Table is 576 mm x 474 mm x 576 mm, each box contains a single Terslale Coffee Table and the bounding box dimensions for the package is 626 mm x 524 mm x 626 mm, roughly 180 pieces fit into 20' standard container and 380 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2008-11-24 00:13:25.


Get a price quote for Terslale Coffee Table or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Orkuk Coffee Table #191 designed in 2008
Permanent Link : http://www.omcdesign.com/?design=191&type=Coffee+Table [View]
Orkuk Coffee Table
The Coffee Table: With the color of the coffee, this coffee table is one of a kind support for your coffe needs..

How to Produce: Injection molded plastics..

Possible Materials: The designer noted the following materials could be used in production: Plastic.

Dimensions and Packaging: The enclosing box for a single Orkuk Coffee Table is 260 mm x 370 mm x 240 mm, each box contains a single Orkuk Coffee Table and the bounding box dimensions for the package is 310 mm x 420 mm x 290 mm, roughly 960 pieces fit into 20' standard container and 2016 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2008-11-24 00:12:28.


Get a price quote for Orkuk Coffee Table or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Pkmz Stool #190 designed in 2008
Permanent Link : http://www.omcdesign.com/?design=190&type=Stool [View]
Pkmz Stool
The Stool: Aren't you bored of the same looking stools! Yeah, here comes a stool that will stand out for you to sit down, a bit of afraid it might bite you.. Actually the stool is designed outdoors and the teeths are to slide out water..

How to Produce: Top part in injection molding plastics, legs in bended empty metal tubes chromed blueish..

Possible Materials: The designer noted the following materials could be used in production: Metal, Plastic.

Dimensions and Packaging: The enclosing box for a single Pkmz Stool is 365 mm x 450 mm x 365 mm, each box contains a single Pkmz Stool and the bounding box dimensions for the package is 415 mm x 500 mm x 415 mm, roughly 432 pieces fit into 20' standard container and 870 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2008-11-24 00:11:57.


Get a price quote for Pkmz Stool or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Nevarkiyani Stool #189 designed in 2008
Permanent Link : http://www.omcdesign.com/?design=189&type=Stool [View]
Nevarkiyani Stool
The Stool: Stool re-defined for the working environment, this is not a regular wood or plastic stool that you get bored of, it is a metal and leather stool that adds value to your business space!.

How to Produce: Legs are identical and they can be casted or pressed from a metal, then connected to the upper part. Top part coated with polyurethane foam first and then leather. Legs are chromed..

Possible Materials: The designer noted the following materials could be used in production: Metal, Plastic.

Dimensions and Packaging: The enclosing box for a single Nevarkiyani Stool is 480 mm x 460 mm x 560 mm, each box contains a single Nevarkiyani Stool and the bounding box dimensions for the package is 530 mm x 510 mm x 610 mm, roughly 250 pieces fit into 20' standard container and 500 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2008-11-24 00:11:27.


Get a price quote for Nevarkiyani Stool or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Ufoindi Chair #188 designed in 2008
Permanent Link : http://www.omcdesign.com/?design=188&type=Chair [View]
Ufoindi Chair
The Chair: A wooden chair that is just fun! The set could be in all different colors; for the colored parts. Quite comfortable. I must note that this chair is very ergonomic..

How to Produce: Artisan woodwork is required, I prefer the seating from a big solid wood..

Possible Materials: The designer noted the following materials could be used in production: Wood.

Dimensions and Packaging: The enclosing box for a single Ufoindi Chair is 560 mm x 870 mm x 550 mm, each box contains a single Ufoindi Chair and the bounding box dimensions for the package is 610 mm x 920 mm x 600 mm, roughly 120 pieces fit into 20' standard container and 240 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2008-11-24 00:10:45.


Get a price quote for Ufoindi Chair or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Kugugu Stool #187 designed in 2008
Permanent Link : http://www.omcdesign.com/?design=187&type=Stool [View]
Kugugu Stool
The Stool: Uses Ottoman hexagonal shape as a base, this stool meanwhile is covered with Japanese textiles. A synergy between the middle east and the far east..

How to Produce: Identical legs could be lathed from wood, or cast by metal or injection molded by plastics, top part is polyurethane foam covered with textiles..

Possible Materials: The designer noted the following materials could be used in production: Plastic, Plastic, Polyurethane Foam.

Dimensions and Packaging: The enclosing box for a single Kugugu Stool is 480 mm x 500 mm x 480 mm, each box contains a single Kugugu Stool and the bounding box dimensions for the package is 530 mm x 550 mm x 530 mm, roughly 220 pieces fit into 20' standard container and 460 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2008-11-24 00:47:24.


Get a price quote for Kugugu Stool or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Copyrights: If you like to print the designs on a design magazine or publication, unmasked and higher resolutions and 3D versions will be available on demand, please write us your requests and details to omcdesign@gmail.com. If you like to produce the designs or use in your projects please contact us. ! Everything on this site is copyright © OMC² Design Studios; all rights reserved. Please do not use anything without permission. To get permission, write to Onur Müstak Çobanli, and explain what you intend to use it for. If you have a blog and would like to write about us, feel free to do so without asking permission, you can use the images here, please include a link to our webpage and if possible keep the watermark.
OR
Design #ID:
Share This  
Facebook Icon
Join our Facebook group!
Twitter Icon
Folow us at Twitter
Feed Icon
Subscribe to RSS Feed
Memori.ru
Hatena
Del.icio.us
Yigg.de
Blinklist
Oyyla
StumbleUpon



Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 <Back