Design by OMC²
Show Categories
Recreate Image Bezier Coffee Table #373 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=373&type=Coffee+Table [View]
Bezier Coffee Table
The Coffee Table: I am a fanboy of Bezier curves to an extreme extend, and I always like to play with organic shapes and this is what I came up with while trying to imitate two drops of water bridge / merge with each other..

How to Produce: Cut from solid wood with the designated shape. Metal legs are joined to table top and welded at the bottom..

Possible Materials: The designer noted the following materials could be used in production: Wood, Metal.

Dimensions and Packaging: The enclosing box for a single Bezier Coffee Table is 1183 mm x 489 mm x 652 mm, each box contains a single Bezier Coffee Table and the bounding box dimensions for the package is 1233 mm x 539 mm x 702 mm, roughly 66 pieces fit into 20' standard container and 136 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2009-02-08 10:41:45.


Get a price quote for Bezier Coffee Table or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Pianoforte Coffee Table #372 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=372&type=Coffee+Table [View]
Pianoforte Coffee Table
The Coffee Table: Inspired by the Pianoforte, this is a unique coffee table (which could also be scaled to be a table as well). Carries the feelings and elegance of a piano to your ambient..

How to Produce: Artisan woodworking, shiny plating as in a piano..

Possible Materials: The designer noted the following materials could be used in production: Wood.

Dimensions and Packaging: The enclosing box for a single Pianoforte Coffee Table is 1576 mm x 500 mm x 1481 mm, each box contains a single Pianoforte Coffee Table and the bounding box dimensions for the package is 1626 mm x 550 mm x 1531 mm, roughly 32 pieces fit into 20' standard container and 56 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2009-02-08 10:34:42.


Get a price quote for Pianoforte Coffee Table or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Trepo Coffee Table #371 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=371&type=Coffee+Table [View]
Trepo Coffee Table
The Coffee Table: Trepo is an evolved tripodish coffee table with an organic feeling, smooth lines and also a sense of sharpness all together. For colorful environments I would have colorless - plain colored legs, and for plain environments I would have colorful legs for the Trepo! A plus; having three legs, Trepo is a very balanced coffee table..

How to Produce: Both parts are cut from metal and pressed to change the shape, glass is solid cut with rounded edges. The leg is spray painted - or electro spray painted. Top and bottom part of the leg can be welded. Another way to do is, rather then cut it totally from a sheet of metal, the legs can be cut 3 times the same shape and finally welded, this would save some space from the sheet of metal also it would save some time during cutting because of the shared edges..

Possible Materials: The designer noted the following materials could be used in production: Glass, Metal.

Dimensions and Packaging: The enclosing box for a single Trepo Coffee Table is 1001 mm x 500 mm x 1156 mm, each box contains a single Trepo Coffee Table and the bounding box dimensions for the package is 1051 mm x 550 mm x 1206 mm, roughly 48 pieces fit into 20' standard container and 88 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2009-02-07 22:02:04.


Get a price quote for Trepo Coffee Table or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Trepo Coffee Table
Up: The prototype of Trepo Coffee Table. 1/5 Scale. Realized with/in Rapid Prototyping / Stereolitography.
Recreate Image Yum Lightbulb #370 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=370&type=Lightbulb [View]
Yum Lightbulb
The Lightbulb: The old lightbulbs are disappearing with the arrival of new technology, this lightbulb is powered by light emitting diodes (leds) to give an ambient light to your environment. The leds are on the bottom and the bright part you see is an illusion, that part is actually empty / or filled with a reflective material so that the leds that are at the bottom will enlighten it and it will look as if it is an Incandescent light bulb..

How to Produce: Injection molding of plastics or blowmolding of glass for the transparent parts, the other parts require a bit of engineering to setup wiring, connection of leds etc..

Possible Materials: The designer noted the following materials could be used in production: Glass, Electrical Components, Metal.

Dimensions and Packaging: The enclosing box for a single Yum Lightbulb is 120 mm x 150 mm x 120 mm, each box contains a single Yum Lightbulb and the bounding box dimensions for the package is 170 mm x 200 mm x 170 mm, roughly 5880 pieces fit into 20' standard container and 11928 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2009-02-07 20:35:42.


Get a price quote for Yum Lightbulb or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Lapis Arm Chair #369 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=369&type=Arm+Chair [View]
Lapis Arm Chair
The Arm Chair: An elegant chair to fill in the happy home spaces! You can lean backwards without fearing to fall, this chair is so comfortable that it redefines your feeling of comfort, you will never sit on another chair after this one!. I would also like to note that this is a re-interpretation of the Chinese Ming chair, we wanted to carry the traditional Chinese chair to the modern era and give it a new look and feeling. The initial inspiration comes from the Horseshoe chair, I wanted to turn this design into something that gives the feeling of strength and elegance at the same time, also I had opportunity to analyze leg structure of modern European furniture, this way I changed the legs of Ming to be somehow more modern, the structure is built upon a steel skeleton which is covered with real leather..

How to Produce: Perhaps we can have it in metal coated with leather, the structure can be welded and then we can have a coat on it, this would be a simple solution, more industrial solutions such as injection molding of plastics can be thought, it is important to have an inset metal support for the legs in this case. Wood could be a very good alternative as well..

Possible Materials: The designer noted the following materials could be used in production: Metal, Leather, Wood.

Dimensions and Packaging: The enclosing box for a single Lapis Arm Chair is 700 mm x 900 mm x 675 mm, each box contains a single Lapis Arm Chair and the bounding box dimensions for the package is 750 mm x 950 mm x 725 mm, roughly 72 pieces fit into 20' standard container and 153 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2010-06-27 20:39:33.


Get a price quote for Lapis Arm Chair or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Lapis Arm Chair
Up: The prototype of Lapis Arm Chair. 1/1 Scale. Realized with/in Plastic.
Recreate Image Ming Arm Chair #368 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=368&type=Arm+Chair [View]
Ming Arm Chair
The Arm Chair: Do you remember the Chinese Ming chairs, with their beautiful and handcrafted wooden structure?, Unfortunately they burn. This is a fireproof armchair that carries the traditional taste and elegance of Chinese furniture to today, and also make it even long lasting..

How to Produce: Separated into two parts perhaps: top and base, in the worst case I would mold this item however, it is not actually necessary, we can have it formed from a sheet of metal - cut the metal, press shape and then weld it, then round the edges, afterwards chromed!.

Possible Materials: The designer noted the following materials could be used in production: Metal.

Dimensions and Packaging: The enclosing box for a single Ming Arm Chair is 702 mm x 774 mm x 566 mm, each box contains a single Ming Arm Chair and the bounding box dimensions for the package is 752 mm x 824 mm x 616 mm, roughly 96 pieces fit into 20' standard container and 192 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2009-02-02 22:44:18.


Get a price quote for Ming Arm Chair or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Pink Saber Arm Chair #367 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=367&type=Arm+Chair [View]
Pink Saber Arm Chair
The Arm Chair: It has been so many years since beautiful wooden chairs are designed, I just wanted to make something both contemporary and also had the feeling of the past to carry it to today..

How to Produce: Limited edition, carved from one piece of huge wood. Standard edition is any woodworking. Injection molding of plastics might be an industrial solution but will ruin all the good feelings.. Metal could be interesting to try..

Possible Materials: The designer noted the following materials could be used in production: Wood, Plastic, Metal.

Dimensions and Packaging: The enclosing box for a single Pink Saber Arm Chair is 700 mm x 770 mm x 520 mm, each box contains a single Pink Saber Arm Chair and the bounding box dimensions for the package is 750 mm x 820 mm x 570 mm, roughly 96 pieces fit into 20' standard container and 192 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2009-11-10 07:23:11.


Get a price quote for Pink Saber Arm Chair or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Pink Saber Arm Chair
Up: The prototype of Pink Saber Arm Chair. 1/5 Scale. Realized with/in Rapid Prototyping / Stereolitography.
Recreate Image Caique Couch #366 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=366&type=Couch [View]
Product Family: Kayik
Caique Couch
The Couch: I was moved by the fact that it is six in the morning and I am still designing, I wished I would be by the sea or near a lake or river, somewhere with water basically, then I came up with an idea to design this beauty!.

How to Produce: Legs are metal press formed, basement is metal is a sheet of metal, structure in fiberglass that is melded, cushions in fabric..

Possible Materials: The designer noted the following materials could be used in production: Fiberglass, Metal, Cloth.

Dimensions and Packaging: The enclosing box for a single Caique Couch is 2200 mm x 589 mm x 840 mm, each box contains a single Caique Couch and the bounding box dimensions for the package is 2250 mm x 639 mm x 890 mm, roughly 36 pieces fit into 20' standard container and 60 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2009-07-06 20:38:56.


Get a price quote for Caique Couch or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Kemik Jewellery Display System #365 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=365&type=Jewellery+Display+System [View]
Product Family: Kemik
Kemik Jewellery Display System
The Jewellery Display System: This is a sample configuration of the Kemik system, with Kemiks and the smoothbases used, any type of jewelery can be displayed on it..

How to Produce: Polyurethane foam or wood can be formed to the desired shapes, afterwards will be coated by leather, because this is a jewelery display the level of craftsmanship should be very high, make sure if you stitch the leather the stitches should be underneath where it is not visible, you can also stick the leathers piece by piece. Bases are in 250 mm x 250 mm dimensions with less or more 70 mm in depth..

Possible Materials: The designer noted the following materials could be used in production: Wood, Polyurethane Foam, Leather.

Upload Date & Time:: 2009-02-02 19:13:37.


Get a price quote for Kemik Jewellery Display System or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Kemikler B Jewellery Display Element #364 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=364&type=Jewellery+Display+Element [View]
Product Family: Kemik
Kemikler B Jewellery Display Element
The Jewellery Display Element: These are another set of six different base options for an organic jewelery display system , the display should not be exactly as you see; I have done also a sample configuration with smooth bases because otherwise it will be overcrowded.. .

How to Produce: Polyurethane foam should be cut in the desired shapes and then covered with leather, the stitches should fall into invisible areas. Each element 250 x 250 mm and 70 mm in depth.

Possible Materials: The designer noted the following materials could be used in production: Polyurethane Foam, Wood, Leather.

Dimensions and Packaging: The enclosing box for a single Kemikler B Jewellery Display Element is 250 mm x 250 mm x 70 mm, each box contains a single Kemikler B Jewellery Display Element and the bounding box dimensions for the package is 300 mm x 300 mm x 120 mm, roughly 3200 pieces fit into 20' standard container and 6400 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2009-02-02 19:04:24.


Get a price quote for Kemikler B Jewellery Display Element or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Kemikler A Jewellery Display Element #363 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=363&type=Jewellery+Display+Element [View]
Product Family: Kemik
Kemikler A Jewellery Display Element
The Jewellery Display Element: These are six different base options for an organic jewelery display system and what you see are all the six different building blocks together, the display should not be exactly as you see; I have done also a sample configuration with smooth bases because otherwise it will be overcrowded. .

How to Produce: Polyurethane foam should be cut in the desired shapes and then covered with leather, the stitches should fall into invisible areas. Each element 250 x 250 mm and 70 mm in depth.

Possible Materials: The designer noted the following materials could be used in production: Wood, Metal, Polyurethane Foam.

Dimensions and Packaging: The enclosing box for a single Kemikler A Jewellery Display Element is 250 mm x 250 mm x 70 mm, each box contains a single Kemikler A Jewellery Display Element and the bounding box dimensions for the package is 300 mm x 300 mm x 120 mm, roughly 3200 pieces fit into 20' standard container and 6400 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2009-02-02 19:07:46.


Get a price quote for Kemikler A Jewellery Display Element or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Frame Jewellery Display System #362 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=362&type=Jewellery+Display+System [View]
Product Family: Frame
Frame Jewellery Display System
The Jewellery Display System: Generally speaking!, Photos are taken for extraordinary things, beautiful things, and why not exhibit jewelery as if they were "the photos" of jewelery!? Well, but not any photo-frame will do, one should come up with a better frame, the frame should be as rich as the jewelery it is exhibiting. And here comes the frame family. Designed for gold and platinum jewelery with perhaps diamonds or crystals. Bonus: The displays can be used as trays to show to the customer..

How to Produce: Wooden frameworking actually, matte background to bring the jewelery to front, leather coated sides - the finishing is very important..

Possible Materials: The designer noted the following materials could be used in production: Wood, Metal, Leather.

Upload Date & Time:: 2009-07-06 20:35:50.


Get a price quote for Frame Jewellery Display System or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Yuzuk Cerceve Jewellery Display Element #361 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=361&type=Jewellery+Display+Element [View]
Product Family: Frame
Yuzuk Cerceve Jewellery Display Element
The Jewellery Display Element: Inspired by photo frames and infused with the idea of jewelery trays, this is a sleek way to present the "one ring"..

How to Produce: Simple frame-making from wood perhaps, matte background, leather sides..

Possible Materials: The designer noted the following materials could be used in production: Wood, Metal, Leather.

Dimensions and Packaging: The enclosing box for a single Yuzuk Cerceve Jewellery Display Element is 100 mm x 14 mm x 100 mm, each box contains a single Yuzuk Cerceve Jewellery Display Element and the bounding box dimensions for the package is 150 mm x 64 mm x 150 mm, roughly 23552 pieces fit into 20' standard container and 48128 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2009-02-02 18:14:44.


Get a price quote for Yuzuk Cerceve Jewellery Display Element or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Kolluk Kuvveti Jewellery Display Element #360 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=360&type=Jewellery+Display+Element [View]
Product Family: Frame
Kolluk Kuvveti Jewellery Display Element
The Jewellery Display Element: A frame, is a defined area of focus, the focus is now on the bracelet..

How to Produce: Really trivial frameworking, you can check DIY guides to get an overall idea..

Possible Materials: The designer noted the following materials could be used in production: Metal, Wood, Leather.

Dimensions and Packaging: The enclosing box for a single Kolluk Kuvveti Jewellery Display Element is 130 mm x 280 mm x 120 mm, each box contains a single Kolluk Kuvveti Jewellery Display Element and the bounding box dimensions for the package is 180 mm x 330 mm x 170 mm, roughly 3276 pieces fit into 20' standard container and 6566 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2009-02-02 18:03:17.


Get a price quote for Kolluk Kuvveti Jewellery Display Element or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Kupe Olsun Jewellery Display Element #359 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=359&type=Jewellery+Display+Element [View]
Product Family: Frame
Kupe Olsun Jewellery Display Element
The Jewellery Display Element: Two pairs of earrings might be displayed in this "framework" of jewelery display..

How to Produce: Trivial frame-making skills is required..

Possible Materials: The designer noted the following materials could be used in production: Wood, Wood, Leather.

Dimensions and Packaging: The enclosing box for a single Kupe Olsun Jewellery Display Element is 220 mm x 160 mm x 100 mm, each box contains a single Kupe Olsun Jewellery Display Element and the bounding box dimensions for the package is 270 mm x 210 mm x 150 mm, roughly 4032 pieces fit into 20' standard container and 8208 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2009-02-02 17:56:44.


Get a price quote for Kupe Olsun Jewellery Display Element or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Cerceve Jewellery Display Element #358 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=358&type=Jewellery+Display+Element [View]
Product Family: Frame
Cerceve Jewellery Display Element
The Jewellery Display Element: What do we take photo of? In most cases, beauties, therefore a jewelery has the right to be on photo, or at least on the frame..

How to Produce: Matte black background, reddish leather, basic framebuilding skills..

Possible Materials: The designer noted the following materials could be used in production: Wood, Leather, Metal.

Dimensions and Packaging: The enclosing box for a single Cerceve Jewellery Display Element is 220 mm x 220 mm x 120 mm, each box contains a single Cerceve Jewellery Display Element and the bounding box dimensions for the package is 270 mm x 270 mm x 170 mm, roughly 2835 pieces fit into 20' standard container and 5751 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2009-02-02 17:49:33.


Get a price quote for Cerceve Jewellery Display Element or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Great Muscle Stool #357 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=357&type=Stool [View]
Great Muscle Stool
The Stool: Well, imagine if all the chairs, stools and sofas were alive and they would have muscles under their skin.. This is a by product of what I imagined.. Crazy true, maybe disturbing for some but.. what if they had muscles?.

How to Produce: Injection molding is an option when we think to realize such items, however we can also have it in wood, lathed legs that would be connected to a central element..

Possible Materials: The designer noted the following materials could be used in production: Plastic, Wood.

Dimensions and Packaging: The enclosing box for a single Great Muscle Stool is 250 mm x 250 mm x 420 mm, each box contains a single Great Muscle Stool and the bounding box dimensions for the package is 300 mm x 300 mm x 470 mm, roughly 832 pieces fit into 20' standard container and 1664 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2009-02-02 16:11:05.


Get a price quote for Great Muscle Stool or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Copyrights: If you like to print the designs on a design magazine or publication, unmasked and higher resolutions and 3D versions will be available on demand, please write us your requests and details to omcdesign@gmail.com. If you like to produce the designs or use in your projects please contact us. ! Everything on this site is copyright © OMC² Design Studios; all rights reserved. Please do not use anything without permission. To get permission, write to Onur Müstak Çobanli, and explain what you intend to use it for. If you have a blog and would like to write about us, feel free to do so without asking permission, you can use the images here, please include a link to our webpage and if possible keep the watermark.
OR
Design #ID:
Share This  
Facebook Icon
Join our Facebook group!
Twitter Icon
Folow us at Twitter
Feed Icon
Subscribe to RSS Feed
Memori.ru
Hatena
Del.icio.us
Yigg.de
Blinklist
Oyyla
StumbleUpon



Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 <Back