Design by OMC²
Show Categories
Recreate Image Decaff Coffee Table #662 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=662&type=Coffee+Table [View]
Product Family: Delik
Decaff Coffee Table
The Coffee Table: A continuation of the delik series, this coffee table is full of holes!.

How to Produce: Welding, casting..

Possible Materials: The designer noted the following materials could be used in production: Metal.

Dimensions and Packaging: The enclosing box for a single Decaff Coffee Table is 1270 mm x 378 mm x 849 mm, each box contains a single Decaff Coffee Table and the bounding box dimensions for the package is 1320 mm x 428 mm x 899 mm, roughly 84 pieces fit into 20' standard container and 168 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2009-07-19 06:22:04.


Get a price quote for Decaff Coffee Table or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Citrus Bookshelf #661 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=661&type=Bookshelf [View]
Product Family: Delik
Citrus Bookshelf
The Bookshelf: The citrus bookshelf is lemon green and has many holes inside it to make it lighter..

How to Produce: Bases are casted and welded together..

Possible Materials: The designer noted the following materials could be used in production: Metal.

Dimensions and Packaging: The enclosing box for a single Citrus Bookshelf is 430 mm x 1802 mm x 430 mm, each box contains a single Citrus Bookshelf and the bounding box dimensions for the package is 480 mm x 1852 mm x 480 mm, roughly 75 pieces fit into 20' standard container and 150 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2009-07-19 05:16:36.


Get a price quote for Citrus Bookshelf or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Delik Table #660 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=660&type=Table [View]
Product Family: Delik
Delik Table
The Table: The delik table is full of tiny holes (not very tiny though!), thus very suitable for the outdoors. The structure is light..

How to Produce: The table top can be divided into 8 to have squares of 430mm that could be either cast or press formed, after the base is built, the modules could be weld to each other with perhaps a mechanical joint as well, such as a long stick from one side to other to have additional support as we all know that weld parts are not so dependent, anyways, the legs can be extrusion or press formed from tubular steel, legs are welded to the top, while welding, top part of the legs should be full..

Possible Materials: The designer noted the following materials could be used in production: Metal.

Dimensions and Packaging: The enclosing box for a single Delik Table is 855 mm x 707 mm x 1705 mm, each box contains a single Delik Table and the bounding box dimensions for the package is 905 mm x 757 mm x 1755 mm, roughly 27 pieces fit into 20' standard container and 63 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2009-07-18 14:57:11.


Get a price quote for Delik Table or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Latitude Bookshelf #659 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=659&type=Bookshelf [View]
Product Family: Curio
Latitude Bookshelf
The Bookshelf: This is a fun bookshelf that carries the concept of latitude legend that you could see in the maps right in to your living room! .

How to Produce: My preferred way of realization is by using tubular metal bended and welded, alternatively the structure could be in wood, the painting is the most important element of this design and could be sprayed or painted automatically by a robot..

Possible Materials: The designer noted the following materials could be used in production: Metal, Wood.

Dimensions and Packaging: The enclosing box for a single Latitude Bookshelf is 466 mm x 1797 mm x 466 mm, each box contains a single Latitude Bookshelf and the bounding box dimensions for the package is 516 mm x 1847 mm x 516 mm, roughly 75 pieces fit into 20' standard container and 175 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2009-07-18 12:16:53.


Get a price quote for Latitude Bookshelf or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Curiolib Bookshelf #658 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=658&type=Bookshelf [View]
Product Family: Curio
Curiolib Bookshelf
The Bookshelf: The curiolib is a green library that promises a shiny and young feeling for your house..

How to Produce: Simple woodworking with bend plywood is possible, however, I would prefer metal for the library as it will be stronger, the metal is tubular structure, bended and welded..

Possible Materials: The designer noted the following materials could be used in production: Metal, Wood.

Dimensions and Packaging: The enclosing box for a single Curiolib Bookshelf is 1466 mm x 1847 mm x 566 mm, each box contains a single Curiolib Bookshelf and the bounding box dimensions for the package is 1516 mm x 1897 mm x 616 mm, roughly 24 pieces fit into 20' standard container and 48 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2009-07-18 12:10:28.


Get a price quote for Curiolib Bookshelf or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Knppe 2 Rahat Recliner #657 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=657&type=Recliner [View]
Product Family: Knppe 2
Knppe 2 Rahat Recliner
The Recliner: The recliner with its ottoman is perfectly relaxing..

How to Produce: Production is trivial metal-craftsmanship and woodworking with polyurethane foam to cover the structure, and textiles covering the foam..

Possible Materials: The designer noted the following materials could be used in production: Wood, Metal, Polyurethane Foam.

Dimensions and Packaging: The enclosing box for a single Knppe 2 Rahat Recliner is 1487 mm x 598 mm x 1120 mm, each box contains a single Knppe 2 Rahat Recliner and the bounding box dimensions for the package is 1537 mm x 648 mm x 1170 mm, roughly 40 pieces fit into 20' standard container and 80 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2009-07-17 08:51:30.


Get a price quote for Knppe 2 Rahat Recliner or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Sahipe Coffee Table #656 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=656&type=Coffee+Table [View]
Product Family: Knppe 2
Sahipe Coffee Table
The Coffee Table: The Sahipe blends into the Knppe 2 family perfectly, the design is modern yet not over simple..

How to Produce: Top part in wood, the second layer is also wood covered by the textile, legs in bend tubular steel..

Possible Materials: The designer noted the following materials could be used in production: Metal, Wood, Textiles.

Dimensions and Packaging: The enclosing box for a single Sahipe Coffee Table is 1400 mm x 300 mm x 520 mm, each box contains a single Sahipe Coffee Table and the bounding box dimensions for the package is 1450 mm x 350 mm x 570 mm, roughly 140 pieces fit into 20' standard container and 294 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2009-07-17 08:39:15.


Get a price quote for Sahipe Coffee Table or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Knppe 2 Aile Guest Set #655 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=655&type=Guest+Set [View]
Product Family: Knppe 2
Knppe 2 Aile Guest Set
The Guest Set: This is quite a comfortable and large set, the design was inspired by Ottoman arts. This is an example organization of the Knpee 2 family, the three (big enough for four) seater Padisah, the single seater Cariye, the two seater Sah, and the coffee table Sehipa..

How to Produce: The production involves metal working, woodworking. The legs are tubular steel bended, and the top parts have probably wooden structure that is covered with polyurethane foam and textiles..

Possible Materials: The designer noted the following materials could be used in production: Wood, Polyurethane Foam, Metal.

Dimensions and Packaging: The enclosing box for a single Knppe 2 Aile Guest Set is 4012 mm x 598 mm x 2611 mm, each box contains a single Knppe 2 Aile Guest Set and the bounding box dimensions for the package is 4062 mm x 648 mm x 2661 mm, roughly 9 pieces fit into 20' standard container and 20 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2009-07-17 08:32:45.


Get a price quote for Knppe 2 Aile Guest Set or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Harem Ottoman #654 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=654&type=Ottoman [View]
Product Family: Knppe 2
Harem Ottoman
The Ottoman: The ottoman is highly effected by the Ottoman style, I have designed this one to match the Knppe 2 family..

How to Produce: The production is simple with metal legs supporting the body which could also be metal or wood, there is polyurethane foam used for thickness and the foam is covered by textiles..

Possible Materials: The designer noted the following materials could be used in production: Metal, Polyurethane Foam, Textiles.

Dimensions and Packaging: The enclosing box for a single Harem Ottoman is 700 mm x 328 mm x 522 mm, each box contains a single Harem Ottoman and the bounding box dimensions for the package is 750 mm x 378 mm x 572 mm, roughly 192 pieces fit into 20' standard container and 384 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2009-07-17 06:04:05.


Get a price quote for Harem Ottoman or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Sahan Bench #653 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=653&type=Bench [View]
Product Family: Knppe 2
Sahan Bench
The Bench: The Sahan bench is dual sided and could be used as an island or could be positioned along a wall, for the best comfort, you can throw in some pillows..

How to Produce: The thinnest width is 700 mm. Metal or wooden skeleton is coated by polyurethane foam and textiles, the legs are bend-tubular metal..

Possible Materials: The designer noted the following materials could be used in production: Wood, Polyurethane Foam, Textiles.

Dimensions and Packaging: The enclosing box for a single Sahan Bench is 2200 mm x 385 mm x 896 mm, each box contains a single Sahan Bench and the bounding box dimensions for the package is 2250 mm x 435 mm x 946 mm, roughly 45 pieces fit into 20' standard container and 84 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2009-07-17 05:54:03.


Get a price quote for Sahan Bench or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Cizgise Coffee Table #652 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=652&type=Coffee+Table [View]
Product Family: Cizgi
Cizgise Coffee Table
The Coffee Table: Cizgise coffee table is a great addition to your living spaces, the design is clear and gives your eyes a rest, the table has quite a structure yet uses the minimum amount of materials, recycled wood editions available, it was originally created to compliment the cizgi product family..

How to Produce: Artisan woodworking, lathing etc. If you have to reinforce, metal can replace the originally wooden stripe-path..

Possible Materials: The designer noted the following materials could be used in production: Wood, Metal.

Dimensions and Packaging: The enclosing box for a single Cizgise Coffee Table is 1200 mm x 290 mm x 780 mm, each box contains a single Cizgise Coffee Table and the bounding box dimensions for the package is 1250 mm x 340 mm x 830 mm, roughly 105 pieces fit into 20' standard container and 210 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2009-07-13 21:28:02.


Get a price quote for Cizgise Coffee Table or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Queen Stool #651 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=651&type=Stool [View]
Product Family: Cube Chess
Queen Stool
The Stool: The queen stool is the queen of the chess turned into a stool and also a functional sculpture, city furniture, the design complements the cube chess product family, the inspiration of this family came to me when I was a kid and playing with ice cubes, freezing various objects and trapping them into ice cubes, I thought it was quite a sight, and now years later I am here trying to re-imagine what I was doing in my childhood..

How to Produce: The cube chess family is all produced by rotomolding of policarbonate or other highly translucent plastics, alternatively glass, ice and other material could be used to arrive at limited editions or temporary pieces. Silicon could even be another option for realization..

Possible Materials: The designer noted the following materials could be used in production: Plastic, Glass.

Dimensions and Packaging: The enclosing box for a single Queen Stool is 400 mm x 400 mm x 400 mm, each box contains a single Queen Stool and the bounding box dimensions for the package is 450 mm x 450 mm x 450 mm, roughly 325 pieces fit into 20' standard container and 675 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2009-07-13 21:18:54.


Get a price quote for Queen Stool or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Soffalib Bookshelf #650 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=650&type=Bookshelf [View]
Product Family: Soffa
Soffalib Bookshelf
The Bookshelf: The soffa lib is a really strong looking library with its own respectful and wise appearance, this is perfect for people with a crowded and a lot of really-heavy books. The design matches soffa family smoothly..

How to Produce: Artisan woodworking, note that some parts could be further reinforced by metal..

Possible Materials: The designer noted the following materials could be used in production: Wood, Metal.

Dimensions and Packaging: The enclosing box for a single Soffalib Bookshelf is 1691 mm x 2000 mm x 791 mm, each box contains a single Soffalib Bookshelf and the bounding box dimensions for the package is 1741 mm x 2050 mm x 841 mm, roughly 9 pieces fit into 20' standard container and 21 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2009-07-13 21:08:50.


Get a price quote for Soffalib Bookshelf or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Rook Stool #649 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=649&type=Stool [View]
Product Family: Cube Chess
Rook Stool
The Stool: The rook is definitely a strong element, and my favorite chess piece, the design is to complete the cube chess product family..

How to Produce: Rotomold policarbonate..

Possible Materials: The designer noted the following materials could be used in production: Plastic.

Dimensions and Packaging: The enclosing box for a single Rook Stool is 400 mm x 400 mm x 400 mm, each box contains a single Rook Stool and the bounding box dimensions for the package is 450 mm x 450 mm x 450 mm, roughly 325 pieces fit into 20' standard container and 675 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2009-07-13 21:03:59.


Get a price quote for Rook Stool or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Ince Cizgi Bookshelf #648 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=648&type=Bookshelf [View]
Product Family: Cizgi
Ince Cizgi Bookshelf
The Bookshelf: I have decided to make the cizgi family bigger and came up with a library that can match the modern style of the product, the main point of the library is its strength, in this particular design the red strip is metal, plus even though the design is slim it can carry a lot of weight.

How to Produce: Artisan woodworking, plus metalcraftmanship for the stripes..

Possible Materials: The designer noted the following materials could be used in production: Wood, Metal.

Dimensions and Packaging: The enclosing box for a single Ince Cizgi Bookshelf is 1200 mm x 2040 mm x 354 mm, each box contains a single Ince Cizgi Bookshelf and the bounding box dimensions for the package is 1250 mm x 2090 mm x 404 mm, roughly 36 pieces fit into 20' standard container and 72 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2009-07-13 21:00:36.


Get a price quote for Ince Cizgi Bookshelf or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Knight Stool #647 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=647&type=Stool [View]
Product Family: Cube Chess
Knight Stool
The Stool: The knight is an interesting piece of chess that could cause unexpected twist in strategy, this particular design is part of the cube chess family of products. .

How to Produce: The design is realized by rotational molding of plastics, pc could be used perhaps and the mold will be three pieces..

Possible Materials: The designer noted the following materials could be used in production: Plastic.

Dimensions and Packaging: The enclosing box for a single Knight Stool is 400 mm x 400 mm x 400 mm, each box contains a single Knight Stool and the bounding box dimensions for the package is 450 mm x 450 mm x 450 mm, roughly 325 pieces fit into 20' standard container and 675 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2009-07-13 20:12:14.


Get a price quote for Knight Stool or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Landing End Table #646 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=646&type=End+Table [View]
Product Family: Struktr
Landing End Table
The End Table: This is another configuration of the moon coffee table, quite durable as it makes use of the Struktr base. Can also be used as an exhibition stand..

How to Produce: Struktr base is created by casting metal or by welding tubular metal, then each base is connected to other by again casting, top part is acrylic, in the picture it is 20 mm but it could also be 10 mm or even less, it depends on how much pressure you will apply on the object, as it could also be used as a stand..

Possible Materials: The designer noted the following materials could be used in production: Metal, Acrylic.

Dimensions and Packaging: The enclosing box for a single Landing End Table is 500 mm x 260 mm x 500 mm, each box contains a single Landing End Table and the bounding box dimensions for the package is 550 mm x 310 mm x 550 mm, roughly 352 pieces fit into 20' standard container and 704 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2009-07-13 20:04:49.


Get a price quote for Landing End Table or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Copyrights: If you like to print the designs on a design magazine or publication, unmasked and higher resolutions and 3D versions will be available on demand, please write us your requests and details to omcdesign@gmail.com. If you like to produce the designs or use in your projects please contact us. ! Everything on this site is copyright © OMC² Design Studios; all rights reserved. Please do not use anything without permission. To get permission, write to Onur Müstak Çobanli, and explain what you intend to use it for. If you have a blog and would like to write about us, feel free to do so without asking permission, you can use the images here, please include a link to our webpage and if possible keep the watermark.
OR
Design #ID:
Share This  
Facebook Icon
Join our Facebook group!
Twitter Icon
Folow us at Twitter
Feed Icon
Subscribe to RSS Feed
Memori.ru
Hatena
Del.icio.us
Yigg.de
Blinklist
Oyyla
StumbleUpon



Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 <Back