Design by OMC²
Show Categories
Recreate Image Onda Folding Screen #679 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=679&type=Folding+Screen [View]
Onda Folding Screen
The Folding Screen: The Onda is a folding panel which is inspired by the waves in the sea, similar designs were idealized by Alvar Aalto and Charles Eames (Eames Screen). this one features a metal component..

How to Produce: Panels of plywood is press molded, and attached to the metal connector which act as the folding point. The dimensions given are for one panel only. Alternatively could also be realized from plexiglass or plastics, metal etc..

Possible Materials: The designer noted the following materials could be used in production: Wood, Plastic, Metal.

Dimensions and Packaging: The enclosing box for a single Onda Folding Screen is 600 mm x 1600 mm x 209 mm, each box contains a single Onda Folding Screen and the bounding box dimensions for the package is 650 mm x 1650 mm x 259 mm, roughly 144 pieces fit into 20' standard container and 252 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2009-11-03 04:53:36.


Get a price quote for Onda Folding Screen or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Tung Grand Chair #678 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=678&type=Grand+Chair [View]
Tung Grand Chair
The Grand Chair: The chair takes its inspiration from the beautiful tung flower, I wanted to have an object that is quite comforting and welcoming..

How to Produce: The shell could be realized by slightly 3d molding of the plywood, and after that a layer of sponge and fabric, legs in metal.

Possible Materials: The designer noted the following materials could be used in production: Wood, Polyurethane Foam, Textiles.

Dimensions and Packaging: The enclosing box for a single Tung Grand Chair is 1165 mm x 909 mm x 813 mm, each box contains a single Tung Grand Chair and the bounding box dimensions for the package is 1215 mm x 959 mm x 863 mm, roughly 36 pieces fit into 20' standard container and 78 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2009-08-19 11:32:16.


Get a price quote for Tung Grand Chair or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Crane Street Lighting #677 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=677&type=Street+Lighting [View]
Crane Street Lighting
The Street Lighting: Crane Lamp is a beautiful street lamp that takes its inspiration from the Cranes and energy from the solar panels, more than just being a lamp the object is actually a street sculpture that adds flavor to the space and also provides a pleasant shadow in the hot summer days..

How to Produce: The construction of the object is in metal, the metal is embedded to the ground with a concrete base..

Possible Materials: The designer noted the following materials could be used in production: Metal, Electrical Components.

Dimensions and Packaging: The enclosing box for a single Crane Street Lighting is 5000 mm x 1700 mm x 2000 mm, each box contains a single Crane Street Lighting and the bounding box dimensions for the package is 5050 mm x 1750 mm x 2050 mm, roughly 1 pieces fit into 20' standard container and 2 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2009-08-19 11:14:08.


Get a price quote for Crane Street Lighting or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Faces Vase #676 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=676&type=Vase [View]
Faces Vase
The Vase: Here is one old illusion - the illusion of faces or the vase turns out to be something that is a real vase with faces, I want one for my house!.

How to Produce: The vase is realized by molding ceramics from a plaster template, then cooking it 1200 degrees, painting and re-cooking!.

Possible Materials: The designer noted the following materials could be used in production: Ceramic.

Dimensions and Packaging: The enclosing box for a single Faces Vase is 220 mm x 300 mm x 45 mm, each box contains a single Faces Vase and the bounding box dimensions for the package is 270 mm x 350 mm x 95 mm, roughly 3906 pieces fit into 20' standard container and 8001 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2009-08-17 16:20:32.


Get a price quote for Faces Vase or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Rahleki Rahle #675 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=675&type=Rahle [View]
Rahleki Rahle
The Rahle: The Rahleki carries the traditional Ottoman kilim patterns into an object that reflects the history in a modern way..

How to Produce: Lasercut or plate press cut from metal, the central part needs welding..

Possible Materials: The designer noted the following materials could be used in production: Metal.

Dimensions and Packaging: The enclosing box for a single Rahleki Rahle is 434 mm x 524 mm x 765 mm, each box contains a single Rahleki Rahle and the bounding box dimensions for the package is 484 mm x 574 mm x 815 mm, roughly 150 pieces fit into 20' standard container and 315 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2009-08-13 05:48:12.


Get a price quote for Rahleki Rahle or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Bee Bee Coffee Table #674 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=674&type=Coffee+Table [View]
Bee Bee Coffee Table
The Coffee Table: A huge bee, turning into a coffee table..

How to Produce: Plate pressed metal, hand or machine painted or sprayed..

Possible Materials: The designer noted the following materials could be used in production: Metal.

Dimensions and Packaging: The enclosing box for a single Bee Bee Coffee Table is 1470 mm x 435 mm x 2580 mm, each box contains a single Bee Bee Coffee Table and the bounding box dimensions for the package is 1520 mm x 485 mm x 2630 mm, roughly 24 pieces fit into 20' standard container and 50 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2009-07-31 08:38:26.


Get a price quote for Bee Bee Coffee Table or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Human Clothes Tree #673 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=673&type=Clothes+Tree [View]
Human Clothes Tree
The Clothes Tree: The Human Clothes Tree is a clothes tree with the shape of a human, for holding humans clothes! The cloth hanger is open for hacking and DIY projects, and I think crazy results could suffice, other than that, this is the shape of the median human, circles depicting articulation points (and a mind spot! at the top) therefore could be used in art classes to understand proportions etc..

How to Produce: Metal body parts are bended, welded etc. Bottom part could be wood or plate pressed..

Possible Materials: The designer noted the following materials could be used in production: Metal, Wood.

Dimensions and Packaging: The enclosing box for a single Human Clothes Tree is 750 mm x 1730 mm x 750 mm, each box contains a single Human Clothes Tree and the bounding box dimensions for the package is 800 mm x 1780 mm x 800 mm, roughly 27 pieces fit into 20' standard container and 63 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2009-07-31 07:46:30.


Get a price quote for Human Clothes Tree or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Modern Man Clothes Tree #672 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=672&type=Clothes+Tree [View]
Modern Man Clothes Tree
The Clothes Tree: What is Modern Man? What does Modern Man do? Basically, it is a clothes tree, you can throw your clothes to him and he will catch them! Designed at the dimensions and the shape of an archetype man, the modernman is actually an ironic statement to current state of things..

How to Produce: Metal top is bended or pressed metal, base could be either wood or plate pressed metal..

Possible Materials: The designer noted the following materials could be used in production: Metal, Wood.

Dimensions and Packaging: The enclosing box for a single Modern Man Clothes Tree is 750 mm x 1730 mm x 750 mm, each box contains a single Modern Man Clothes Tree and the bounding box dimensions for the package is 800 mm x 1780 mm x 800 mm, roughly 27 pieces fit into 20' standard container and 63 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2010-06-27 20:49:39.


Get a price quote for Modern Man Clothes Tree or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.


Blueprints of Modern Man Clothes Tree in 1:1 Scale, this is only the general table and detailed technical drawings of this Clothes Tree are available with request to architects and higher education institutions such as universities and technical schools.
Recreate Image Bir Us Bench #671 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=671&type=Bench [View]
Bir Us Bench
The Bench: The Bir US is an unorthodox bench that reassembles a zebra!.

How to Produce: Casted from metal or molded from plastics, and finally painted..

Possible Materials: The designer noted the following materials could be used in production: Metal, Plastic.

Dimensions and Packaging: The enclosing box for a single Bir Us Bench is 1634 mm x 394 mm x 630 mm, each box contains a single Bir Us Bench and the bounding box dimensions for the package is 1684 mm x 444 mm x 680 mm, roughly 80 pieces fit into 20' standard container and 140 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2009-07-31 06:17:47.


Get a price quote for Bir Us Bench or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Adam Bookend #670 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=670&type=Bookend [View]
Adam Bookend
The Bookend: The Adam is the archtype human, and it is destined to hold all your books in one place. The black part - the shadow (or the red part as you might choose has to be under the books to hold them.).

How to Produce: Metal pressing and bending..

Possible Materials: The designer noted the following materials could be used in production: Metal.

Dimensions and Packaging: The enclosing box for a single Adam Bookend is 32 mm x 120 mm x 120 mm, each box contains a single Adam Bookend and the bounding box dimensions for the package is 82 mm x 170 mm x 170 mm, roughly 14210 pieces fit into 20' standard container and 28826 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2010-06-10 17:13:47.


Get a price quote for Adam Bookend or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.


Blueprints of Adam Bookend in 1:1 Scale, this is only the general table and detailed technical drawings of this Bookend are available with request to architects and higher education institutions such as universities and technical schools.
Recreate Image Bone Stacking Chair #669 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=669&type=Stacking+Chair [View]
Bone Stacking Chair
The Stacking Chair: The bone chair is a plywood stackable chair that takes its inspiration from the archtype bone! .

How to Produce: The top and bottom parts of the seating are plywood, the connection is metal casted, legs tubular metal bended. If realized in plastics, the metal mid part is not necessary, but this would be a new design..

Possible Materials: The designer noted the following materials could be used in production: Wood, Metal, Plastic.

Dimensions and Packaging: The enclosing box for a single Bone Stacking Chair is 684 mm x 905 mm x 525 mm, each box contains a single Bone Stacking Chair and the bounding box dimensions for the package is 734 mm x 955 mm x 575 mm, roughly 72 pieces fit into 20' standard container and 192 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2009-07-29 10:59:28.


Get a price quote for Bone Stacking Chair or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Kontraplak Stacking Chair #668 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=668&type=Stacking+Chair [View]
Kontraplak Stacking Chair
The Stacking Chair: This is not your usual plywood chair, this one is quite comfortable, highly stackable and easy to carry and has better legs!.

How to Produce: Top part is plywood bending, legs are filled metal tubes bend and welded. The top part could also be injected molded, however in this case the structure would need to change a bit..

Possible Materials: The designer noted the following materials could be used in production: Wood, Metal, Plastic.

Dimensions and Packaging: The enclosing box for a single Kontraplak Stacking Chair is 538 mm x 907 mm x 580 mm, each box contains a single Kontraplak Stacking Chair and the bounding box dimensions for the package is 588 mm x 957 mm x 630 mm, roughly 96 pieces fit into 20' standard container and 240 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2009-07-29 10:11:31.


Get a price quote for Kontraplak Stacking Chair or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Jellyfish End Table #667 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=667&type=End+Table [View]
Jellyfish End Table
The End Table: The Jellyfish is a new and bluer version of the previous Gun Es end-table, the design is kind of nostalgic for those always want to be at sea and under sunshine, I was inspired by the waves of the sea, sunshine and the jellyfish and therefore the name..

How to Produce: Metal parts are either casted (inside hollow) or bended metal tubes they are afterwards chromed in metallic blue, top part in cobalt-glass..

Possible Materials: The designer noted the following materials could be used in production: Plastic, Glass, Metal.

Dimensions and Packaging: The enclosing box for a single Jellyfish End Table is 765 mm x 399 mm x 765 mm, each box contains a single Jellyfish End Table and the bounding box dimensions for the package is 815 mm x 449 mm x 815 mm, roughly 117 pieces fit into 20' standard container and 243 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2010-06-10 14:55:44.


Get a price quote for Jellyfish End Table or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.


Blueprints of Jellyfish End Table in 1:1 Scale, this is only the general table and detailed technical drawings of this End Table are available with request to architects and higher education institutions such as universities and technical schools.
Recreate Image Foglia End Table #666 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=666&type=End+Table [View]
Product Family: Yaprak
Foglia End Table
The End Table: As organic as it gets, the foglia is a sculpturish furniture with an ornamental shape inspired by leafs and the nature, this particular design is also available in chromed metal for more serious locations..

How to Produce: When realized in plastics, the method is to use injection molding, alternatively, in fiberglass it will be casted into a plaster mold, and if it is metal, it is press formed and bended..

Possible Materials: The designer noted the following materials could be used in production: Ceramic, Plastic, Fiberglass.

Dimensions and Packaging: The enclosing box for a single Foglia End Table is 550 mm x 429 mm x 531 mm, each box contains a single Foglia End Table and the bounding box dimensions for the package is 600 mm x 479 mm x 581 mm, roughly 200 pieces fit into 20' standard container and 420 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2009-07-24 04:19:15.


Get a price quote for Foglia End Table or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Yergu Stool #665 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=665&type=Stool [View]
Product Family: Yaprak
Yergu Stool
The Stool: Heavily inspired by nature, this tripod stool /seating system is totally out of ordinary. The design blends into natural environments perfectly..

How to Produce: The object is injection molded from plastics with a metal skeleton insert. A limited edition fiberglass version is also available..

Possible Materials: The designer noted the following materials could be used in production: Plastic, Metal, Fiberglass.

Dimensions and Packaging: The enclosing box for a single Yergu Stool is 1304 mm x 400 mm x 1146 mm, each box contains a single Yergu Stool and the bounding box dimensions for the package is 1354 mm x 450 mm x 1196 mm, roughly 52 pieces fit into 20' standard container and 108 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2009-11-09 07:15:01.


Get a price quote for Yergu Stool or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Yergu Stool
Up: The prototype of Yergu Stool. 1/5 Scale. Realized with/in Rapid Prototyping / Stereolitography.
Recreate Image Leaflet Chaise Longue #664 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=664&type=Chaise+Longue [View]
Product Family: Yaprak
Leaflet Chaise Longue
The Chaise Longue: After a long period of time, I wanted to design a new element for the leaf/yaprak family which is inspired from the nature, this is kind of a rather shorter chaise lounge for sunbathing and poolsides..

How to Produce: The top part is fiberglass molding, bottom parts in metal..

Possible Materials: The designer noted the following materials could be used in production: Metal, Fiberglass, Plastic.

Dimensions and Packaging: The enclosing box for a single Leaflet Chaise Longue is 1117 mm x 1115 mm x 1497 mm, each box contains a single Leaflet Chaise Longue and the bounding box dimensions for the package is 1167 mm x 1165 mm x 1547 mm, roughly 20 pieces fit into 20' standard container and 40 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2009-07-24 04:02:37.


Get a price quote for Leaflet Chaise Longue or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Crescent Bench #663 designed in 2009
Permanent Link : http://www.omcdesign.com/?design=663&type=Bench [View]
Product Family: Mantar
Crescent Bench
The Bench: The final in the mantar series, I wanted to have it in red to add same flavor to the space..

How to Produce: Press-forming of mesh metal sheet..

Possible Materials: The designer noted the following materials could be used in production: Metal.

Dimensions and Packaging: The enclosing box for a single Crescent Bench is 1062 mm x 426 mm x 2039 mm, each box contains a single Crescent Bench and the bounding box dimensions for the package is 1112 mm x 476 mm x 2089 mm, roughly 30 pieces fit into 20' standard container and 60 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2009-07-24 03:49:20.


Get a price quote for Crescent Bench or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Copyrights: If you like to print the designs on a design magazine or publication, unmasked and higher resolutions and 3D versions will be available on demand, please write us your requests and details to omcdesign@gmail.com. If you like to produce the designs or use in your projects please contact us. ! Everything on this site is copyright © OMC² Design Studios; all rights reserved. Please do not use anything without permission. To get permission, write to Onur Müstak Çobanli, and explain what you intend to use it for. If you have a blog and would like to write about us, feel free to do so without asking permission, you can use the images here, please include a link to our webpage and if possible keep the watermark.
OR
Design #ID:
Share This  
Facebook Icon
Join our Facebook group!
Twitter Icon
Folow us at Twitter
Feed Icon
Subscribe to RSS Feed
Memori.ru
Hatena
Del.icio.us
Yigg.de
Blinklist
Oyyla
StumbleUpon



Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 <Back