Design by OMC²
Show Categories
Recreate Image Roundy Children's Chair #1019 designed in 2010
Permanent Link : http://www.omcdesign.com/?design=1019&type=Children%27s+Chair [View]
Roundy Children's Chair
The Children's Chair: Roundy is a very rounded arch-type chair for children, it is totally smoothed and softened..

How to Produce: Realized in plastics by using rotomolding technology..

Possible Materials: The designer noted the following materials could be used in production: Plastic.

Dimensions and Packaging: The enclosing box for a single Roundy Children's Chair is 246 mm x 498 mm x 309 mm, each box contains a single Roundy Children's Chair and the bounding box dimensions for the package is 296 mm x 548 mm x 359 mm, roughly 616 pieces fit into 20' standard container and 1232 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2010-04-22 10:47:21.


Get a price quote for Roundy Children's Chair or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Paper Works Children's Table Set #1018 designed in 2010
Permanent Link : http://www.omcdesign.com/?design=1018&type=Children%27s+Table+Set [View]
Paper Works Children's Table Set
The Children's Table Set: Paper works is a children's set consisting of 1 Big Paper work and 5 Paper Work stools, the design, with its smoothed edges and rounded curved finishing is children friendly. Pieces can be turned upside down to create a playground!.

How to Produce: All pieces are realized by rotational molding technology using plastics..

Possible Materials: The designer noted the following materials could be used in production: Plastic.

Dimensions and Packaging: The enclosing box for a single Paper Works Children's Table Set is 1817 mm x 500 mm x 800 mm, each box contains a single Paper Works Children's Table Set and the bounding box dimensions for the package is 1867 mm x 550 mm x 850 mm, roughly 36 pieces fit into 20' standard container and 72 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2010-04-22 10:19:35.


Get a price quote for Paper Works Children's Table Set or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Big Paper Work Children's Table #1017 designed in 2010
Permanent Link : http://www.omcdesign.com/?design=1017&type=Children%27s+Table [View]
Big Paper Work Children's Table
The Children's Table: Big Paper Work is a table for children that was inspired by origami and paper folding, the edges are all rounded and softened to be child friendly. Can be turned upside down to provide a platform for toys..

How to Produce: Realized in rotomolded plastics as a single piece..

Possible Materials: The designer noted the following materials could be used in production: Plastic.

Dimensions and Packaging: The enclosing box for a single Big Paper Work Children's Table is 812 mm x 500 mm x 825 mm, each box contains a single Big Paper Work Children's Table and the bounding box dimensions for the package is 862 mm x 550 mm x 875 mm, roughly 99 pieces fit into 20' standard container and 198 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2010-04-22 10:03:59.


Get a price quote for Big Paper Work Children's Table or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Paper Work Children's Stool #1016 designed in 2010
Permanent Link : http://www.omcdesign.com/?design=1016&type=Children%27s+Stool [View]
Paper Work Children's Stool
The Children's Stool: Paper work is an origami inspired stool for children that also acts as a toy, when rotated upside down it becomes an air port or platform or houses (imagine a child's world!), All the edges are finely smoothed and rounded to stop any possible accidents. The stool is large, very stable and durable..

How to Produce: Rotamolded from plastics as a single piece..

Possible Materials: The designer noted the following materials could be used in production: Plastic.

Dimensions and Packaging: The enclosing box for a single Paper Work Children's Stool is 642 mm x 285 mm x 470 mm, each box contains a single Paper Work Children's Stool and the bounding box dimensions for the package is 692 mm x 335 mm x 520 mm, roughly 315 pieces fit into 20' standard container and 595 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2010-04-22 09:23:29.


Get a price quote for Paper Work Children's Stool or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Plantations Children's Table Set #1015 designed in 2010
Permanent Link : http://www.omcdesign.com/?design=1015&type=Children%27s+Table+Set [View]
Plantations Children's Table Set
The Children's Table Set: A table ideal for playing little games together, the Plantations set consist of 5 Mini Plantations and a Midi Plantation, all the pieces can be turned upside down and used as toy as well, the furnitures are rounded and smoothed to be children friendly..

How to Produce: Each piece is realized by rotational molding of plastics..

Possible Materials: The designer noted the following materials could be used in production: Plastic.

Dimensions and Packaging: The enclosing box for a single Plantations Children's Table Set is 750 mm x 500 mm x 750 mm, each box contains a single Plantations Children's Table Set and the bounding box dimensions for the package is 800 mm x 550 mm x 800 mm, roughly 99 pieces fit into 20' standard container and 198 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2010-04-22 08:21:54.


Get a price quote for Plantations Children's Table Set or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Medi Plantation Children's Table #1014 designed in 2010
Permanent Link : http://www.omcdesign.com/?design=1014&type=Children%27s+Table [View]
Medi Plantation Children's Table
The Children's Table: The table version of the Mini Plantation, it could even be used as a stool by adults, smoothed and rounded to be child friendly, can be turned upside down to be used as a toy..

How to Produce: Realized by rotational molding of plastics as a single piece..

Possible Materials: The designer noted the following materials could be used in production: Plastic.

Dimensions and Packaging: The enclosing box for a single Medi Plantation Children's Table is 334 mm x 500 mm x 336 mm, each box contains a single Medi Plantation Children's Table and the bounding box dimensions for the package is 384 mm x 550 mm x 386 mm, roughly 396 pieces fit into 20' standard container and 792 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2010-04-22 08:19:07.


Get a price quote for Medi Plantation Children's Table or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Mini Plantation Children's Stool #1013 designed in 2010
Permanent Link : http://www.omcdesign.com/?design=1013&type=Children%27s+Stool [View]
Mini Plantation Children's Stool
The Children's Stool: Mini plantation is both a stool and a toy, when turned upside down, it looks like a micro plantation, many of them together looks like a mini garden! All of the designs are smoothed and rounded to be children friendly..

How to Produce: Realized as single pieces by two-part rotational molding..

Possible Materials: The designer noted the following materials could be used in production: Plastic.

Dimensions and Packaging: The enclosing box for a single Mini Plantation Children's Stool is 200 mm x 300 mm x 200 mm, each box contains a single Mini Plantation Children's Stool and the bounding box dimensions for the package is 250 mm x 350 mm x 250 mm, roughly 1680 pieces fit into 20' standard container and 3360 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2010-04-22 08:15:06.


Get a price quote for Mini Plantation Children's Stool or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Sut Disleri Children's Table Set #1012 designed in 2010
Permanent Link : http://www.omcdesign.com/?design=1012&type=Children%27s+Table+Set [View]
Sut Disleri Children's Table Set
The Children's Table Set: Children & Kid's furniture set, consists of 5 Sut Disi stools and 1 Disim Sisti table, all of them are rounded and smoothed designs that are children friendly..

How to Produce: All of the products are produced as single pieces from rotomolding of plastics..

Possible Materials: The designer noted the following materials could be used in production: Plastic.

Dimensions and Packaging: The enclosing box for a single Sut Disleri Children's Table Set is 1200 mm x 500 mm x 500 mm, each box contains a single Sut Disleri Children's Table Set and the bounding box dimensions for the package is 1250 mm x 550 mm x 550 mm, roughly 88 pieces fit into 20' standard container and 176 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2010-04-22 07:42:44.


Get a price quote for Sut Disleri Children's Table Set or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Disim Sisti Children's Table #1011 designed in 2010
Permanent Link : http://www.omcdesign.com/?design=1011&type=Children%27s+Table [View]
Disim Sisti Children's Table
The Children's Table: Disim Sisti is a fun table concept that was inspired by tooths, it is totally smoothed and rounded to prevent any unexpected accidents!.

How to Produce: Produced by rotational molding of plastics..

Possible Materials: The designer noted the following materials could be used in production: Plastic.

Dimensions and Packaging: The enclosing box for a single Disim Sisti Children's Table is 775 mm x 500 mm x 775 mm, each box contains a single Disim Sisti Children's Table and the bounding box dimensions for the package is 825 mm x 550 mm x 825 mm, roughly 99 pieces fit into 20' standard container and 198 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2010-04-22 07:23:29.


Get a price quote for Disim Sisti Children's Table or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Sut Disi Children's Stool #1010 designed in 2010
Permanent Link : http://www.omcdesign.com/?design=1010&type=Children%27s+Stool [View]
Sut Disi Children's Stool
The Children's Stool: Sut Disi is a little tooth shaped stool for children, there are no sharp edges and it is rounded as much as it could be to prevent any accidents..

How to Produce: Rotomolded from plastics..

Possible Materials: The designer noted the following materials could be used in production: Plastic.

Dimensions and Packaging: The enclosing box for a single Sut Disi Children's Stool is 267 mm x 300 mm x 267 mm, each box contains a single Sut Disi Children's Stool and the bounding box dimensions for the package is 317 mm x 350 mm x 317 mm, roughly 1064 pieces fit into 20' standard container and 2128 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2010-04-22 06:59:11.


Get a price quote for Sut Disi Children's Stool or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Response Pendant Light #1009 designed in 2010
Permanent Link : http://www.omcdesign.com/?design=1009&type=Pendant+Light [View]
Response Pendant Light
The Pendant Light: Response is a large plane of light that decorates the ceiling, it has a modernist and simple yet strong look..

How to Produce: Two planes of thermoformed material such as glass, acrylic etc depending on light source, are brought together and fixed together by steel cables..

Possible Materials: The designer noted the following materials could be used in production: Glass, Acrylic, Metal.

Dimensions and Packaging: The enclosing box for a single Response Pendant Light is 2000 mm x 227 mm x 995 mm, each box contains a single Response Pendant Light and the bounding box dimensions for the package is 2050 mm x 277 mm x 1045 mm, roughly 54 pieces fit into 20' standard container and 108 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2010-04-22 02:23:41.


Get a price quote for Response Pendant Light or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Aina Make-up Lamp #1008 designed in 2010
Permanent Link : http://www.omcdesign.com/?design=1008&type=Make-up+Lamp [View]
Aina Make-up Lamp
The Make-up Lamp: Aina is a stylistic and functional make-up mirror and light with sidelights that provide indirect illumination. The make-up lamp also features a shelf to store cosmetics. Made from anodized stainless steel or inox metal, Aina is a long-lasting futuristic design..

How to Produce: A metal body is formed by applying high pressure to a sheet of cnc-cut metal which is finally anodized or chromed, lights and the mirror is attached at the final step. Side panels are transparent poli-carbonate. .

Possible Materials: The designer noted the following materials could be used in production: Metal, Glass, Electrical Components.

Dimensions and Packaging: The enclosing box for a single Aina Make-up Lamp is 1000 mm x 1000 mm x 100 mm, each box contains a single Aina Make-up Lamp and the bounding box dimensions for the package is 1050 mm x 1050 mm x 150 mm, roughly 192 pieces fit into 20' standard container and 352 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2010-04-15 15:21:07.


Get a price quote for Aina Make-up Lamp or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Boppo Bed #1007 designed in 2010
Permanent Link : http://www.omcdesign.com/?design=1007&type=Bed [View]
Boppo Bed
The Bed: A stylish bed with rounded edges, the Boppo bed is also extremely comfortable, the bed comes with the complementing bedside chests..

How to Produce: Carefully crafted from wood, colored by lacquering..

Possible Materials: The designer noted the following materials could be used in production: Wood.

Dimensions and Packaging: The enclosing box for a single Boppo Bed is 2800 mm x 1100 mm x 2235 mm, each box contains a single Boppo Bed and the bounding box dimensions for the package is 2850 mm x 1150 mm x 2285 mm, roughly 6 pieces fit into 20' standard container and 10 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2010-04-05 07:49:13.


Get a price quote for Boppo Bed or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Baba Outdoor Seating System #1006 designed in 2010
Permanent Link : http://www.omcdesign.com/?design=1006&type=Outdoor+Seating+System [View]
Baba Outdoor Seating System
The Outdoor Seating System: Inspired by the Napolitanian dessert Babà, and also the bollards, this is an outdoor seating object that allows seating of two or three people. The object is intentionally made quite heavy, and it can be fixed to the ground..

How to Produce: Metal casted in two pieces and then welded, finally it is polished and chromed..

Possible Materials: The designer noted the following materials could be used in production: Metal.

Dimensions and Packaging: The enclosing box for a single Baba Outdoor Seating System is 600 mm x 367 mm x 600 mm, each box contains a single Baba Outdoor Seating System and the bounding box dimensions for the package is 650 mm x 417 mm x 650 mm, roughly 224 pieces fit into 20' standard container and 464 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2010-04-03 15:26:43.


Get a price quote for Baba Outdoor Seating System or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Happy Belly Stool #1005 designed in 2010
Permanent Link : http://www.omcdesign.com/?design=1005&type=Stool [View]
Happy Belly Stool
The Stool: Is it a Stool? Is it an Ottoman? Is it a Chair? Is it an Arm Chair? Is it a Puff? It is the Happy Belly ! A stool, an ottoman, a chair, an arm chair and a puff at the same time!.

How to Produce: A wooden / metal skeleton is made coated with polyurethane foam and textiles or leather..

Possible Materials: The designer noted the following materials could be used in production: Wood, Polyurethane Foam, Textiles.

Dimensions and Packaging: The enclosing box for a single Happy Belly Stool is 613 mm x 506 mm x 607 mm, each box contains a single Happy Belly Stool and the bounding box dimensions for the package is 663 mm x 556 mm x 657 mm, roughly 176 pieces fit into 20' standard container and 352 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2010-04-03 13:42:14.


Get a price quote for Happy Belly Stool or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Golden Egg Grand Chair #1004 designed in 2010
Permanent Link : http://www.omcdesign.com/?design=1004&type=Grand+Chair [View]
Golden Egg Grand Chair
The Grand Chair: The Golden Egg chair was inspired by the Easter Eggs, it is a protective design that surrounds the the seater, an object with two sides; hard in the outside, soft in the inside...

How to Produce: The frame / base is realized in fiberglass that is casted and then chromed. Inner part is polyurethane foam covered by leather..

Possible Materials: The designer noted the following materials could be used in production: Fiberglass, Polyurethane Foam, Leather.

Dimensions and Packaging: The enclosing box for a single Golden Egg Grand Chair is 613 mm x 805 mm x 607 mm, each box contains a single Golden Egg Grand Chair and the bounding box dimensions for the package is 663 mm x 855 mm x 657 mm, roughly 112 pieces fit into 20' standard container and 224 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2010-04-03 13:28:23.


Get a price quote for Golden Egg Grand Chair or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Recreate Image Snake Data Stick #1003 designed in 2010
Permanent Link : http://www.omcdesign.com/?design=1003&type=Data+Stick [View]
Snake Data Stick
The Data Stick: Now, we are living in an era with multiple USB keys per capita, however there are not enough plugs! This is a scaling USB key system that can stuck up to 127 keys! Imagine that. It can become a huge snake as well! A joyful design that brings a usb hub and usb key together with a sensation of game-play and toys. Long-live the USB Snake! Why? Because there is never enough USB ports to put gadgets, especially for self-proclaimed computer geeks, the USB ports are a rare commodity, the Snake USB solves this particular problem and up to 127 of them could be serially connected to store Terabytes of storage, thats right it is not Gigabytes but Terabytes..

How to Produce: Injection molding of plastics!.

Possible Materials: The designer noted the following materials could be used in production: Plastic.

Dimensions and Packaging: The enclosing box for a single Snake Data Stick is 48 mm x 16 mm x 20 mm, each box contains a single Snake Data Stick and the bounding box dimensions for the package is 98 mm x 66 mm x 70 mm, roughly 73440 pieces fit into 20' standard container and 150552 pieces fit into the larger 40' standard container..

Upload Date & Time:: 2010-06-11 08:48:04.


Get a price quote for Snake Data Stick or buy production rights, click for details.
· You can also buy production rights or 3D Drawings for this design, click here to buy it.
Copyrights: If you like to print the designs on a design magazine or publication, unmasked and higher resolutions and 3D versions will be available on demand, please write us your requests and details to omcdesign@gmail.com. If you like to produce the designs or use in your projects please contact us. ! Everything on this site is copyright © OMC² Design Studios; all rights reserved. Please do not use anything without permission. To get permission, write to Onur Müstak Çobanli, and explain what you intend to use it for. If you have a blog and would like to write about us, feel free to do so without asking permission, you can use the images here, please include a link to our webpage and if possible keep the watermark.
OR
Design #ID:
Share This  
Facebook Icon
Join our Facebook group!
Twitter Icon
Folow us at Twitter
Feed Icon
Subscribe to RSS Feed
Memori.ru
Hatena
Del.icio.us
Yigg.de
Blinklist
Oyyla
StumbleUpon



Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 <Back